Hardware Key Not Found - GibbsV12

Hardware Key Not Found - GibbsV12

You can running GibbsCAM in Compatibility Mode:

•    Right-click on the GibbsCAM launch icon

•    Select Properties

•    Go to the Compatibility tab

•    Check the box to "Run this program in compatibility mode for:"

•    Select Windows 8 in the drop down menu


You can also update to v12.0.45:


    • Related Articles

    • Installing the Hardware Key Drive

      Installing With a Hardware Key If you have a hardware key, attach it and install the driver before you install the GibbsCAM software. Current Shipping (1) If the key ID starts with a 3, 4, 5 or 6, install “Sentinel Protection Installer 7.7.X”. ...

    • GibbsCAM Licensing (USB/Hardware Key License, Keyless)

      To install and activate GibbsCAM, please follow the steps below. A USB license installation video is also available in the link below. If you encounter any issues with GibbsCAM, please contact our Support (support@westcam.com) for assistance. Verify ...

    • New PC: Hardware Key Not Detected

      Run 'SSD Cleanup Utility" to wipe all Sentinel Drivers and reinstall the latest one. GibbsCAM uses two types of USB keys: The type can be determined from the 5 digit USB key ID, which is printed either on the key or on the tag connected to the key: ...

    • The hostid of this machine doesn't match any license file

      Solutions: Please check to make sure the USB hardware key is plugged in and is being detected properly. Check the Device Manager to see if it shows up in the Universal Serial Bus Controllers section. Check to see if there are any warnings in the USB ...

    • Remote Access

      You can use remote access to run GibbsCAM with stand alone hardware keys and NLO licenses (both virtual and physical), but they will have certain restrictions. When using an NLO license: While remoting, you can launch multiple instances; but it will ...